Figure Mods - Waiting for Bits

I wasn't planning on another update this soon but I broke my last decent drill bit for my Dremel rotary tool so thought I'd post some more on the command figures while waiting for some more drill bits[1] to arrive courtesy of Amazon (hopefully today).  

My last post saw the three command figures largely dismembered; the ensign needing a new head, the officer a head swap, and the drummer a head and arms swap!  So, after crafting another solder hat for the ensign, here they are put together and starting to take on their final appearance.

Since then, all I have managed is a bit more filing and some final detailing added with greenstuff as going near them with a soldering iron at this stage would undoubtedly see any solder on them revert to a shapeless blob. 

So, with still some tidying up of the greenstuff still to do, here's the officer, ...

... the ensign, ...

... and, the drummer.

I'm quite pleased with these, especially the drummer as he looks quite natural despite being a fairly extreme cut and shut job.  The officer and the ensign will both have boots, the ensign some nice tight ones that can just be done with a paint job.  I'm not sure whether the ensign would've worn a bicorn but I didn't want him in a round hat or competing with the officer's cocked hat.  Anyway, I think he's turned out okay and I like the tilt to his head that looks like he's paying attention to what he's doing with the colour.

Notes:

[1.]  Good drill bits are essential for drilling holes into the heads and torsos of figures having head-swaps to allow a steel wire to be inserted in both to provide a robust joint.  Without one I can't get on with all the rest of the planned head-swaps.

Figure Mods - a WiP Update

The last post which outlined some ambitious figure conversions to make a round-hatted unit of 20mil Napoleonic Spanish Fusiliers seemed to spark some interest.  So, while progress is slow, I thought I'd post an update, mainly to try and keep my conversion mojo ticking along.

First, the test figure, which has now been blocked in with the intended paint scheme.

Getting some paint on him has shown I need to be a little less generous with the 5SecondFix for the trousers and do a better job smoothing them off.  Also, I think a quick bit of greenstuff around the neck to make a more prominent collar will help.  That said, I'm pleased with the colours, the first blue (Humbrol 89) was too light so I gave it a wash of thinned down mid-blue (Humbrol 25) and got exactly the colour I was looking for to match based on an illustration in an Osprey[1].  I will probably highlight with the original light blue colour but I need to attend to the black lining first.

The rest of the figures, head donors and recipients, have all now been through the bleach-bath and had their paint cleaned off and the British revolutionary grenadiers (BRGs for short) have been cleaned up and had their 'wings' removed.  

Today has focussed on the command figures; officer, ensign and drummer.  These are all being worked up from HH (recasts?) BRG command figures.  

First the drummer.  I have no BRG drummer, so have used a sergeant figure and removed his head and arms, the latter in order to fit the arms and drum from a Napoleonic British fusilier drummer - see below.

You will notice his loins have been hollowed out to fit the drum which will be glued in once the greenstuff repairs to the drum and shoulder strap added to the figure (no photo) have cured.  The arms will them be soldered in place at the shoulders for a strong joint, he will also a round-hatted head like the rank and file.

The officers are BRG officer figures, one waving his sword being converted to a standard bearer and the other will be marching as is with his sword at the shoulder, as shown below.

The ensign has had a blob of solder added that will be filed down to create the 'bucket' that the flagstaff is placed in; the shoulder belt from which it is suspended will be added with greenstuff.

As officers I don't want these figures in round hats, so I took one of the spare BRG heads and cut the bearskin down before adding a cocked hat from solder - shown between the two figures in the photo above.  This took several attempts before I could get the solder blob to vaguely resemble the over-sized cocked hats favoured by the Spanish.  This was then followed by lots, and lots, of careful filing, a real chore but the end result is worth it (IMO).  I intend using this head for the commanding officer but haven't yet decided what to do for the ensign ...

... watch this space.

Notes:

[1.]  Man at Arms 332, Spanish Army of the Napoleonic Wars Part 2 1808-1812, Plate G1.  I would put in a picture but again I'm not about the copyright position for doing this. 

Figure Mods - Work in Progress

Having got seduced into the niche that is vintage 20mil Napoleonic's, I compounded my foolishness by opting to focus on the Peninsular War and in particular the Spanish Army.  The Spanish were never a popular choice so few come up on eBay and the choice is limited as back then figure companies didn't make many as the demand wasn't there.  

So, typically I have to modify figures, especially for some of the mid-period new, and volunteer, units in their round hats like that in the photo below - an Austrian fusilier in shako filed to look like a round hat.

Wanting another unit in round hat I started on some more Austrians, but having cherry-picked the best for the above unit the remaining figures were in very poor order and kept breaking.  After drilling into my thumb while trying to mend the latest breakage, I decided I needed to try something else.

Rummaging through my lead pile I decided it was time to make use of some figures actually wearing round hats; an eBay purchase of thirty figures, three of which are shown below.

These figures are almost certainly the same castings as those featured on the 'Hinton Hunter' blog site, which includes a suggestion about their about their origin - see composite screen-shot from the, now defunct, blog below.  Whatever these figures are, if anyone out there has more they are willing to part with do please get in touch.

As I didn't want the unit to be at the attack march, I decided I would swap the heads from these onto some DK(?) British Grenadiers in bearskin from the French Revolutionary period.  These figures are also a good choice for Spanish as they have a simple blanket roll and no back-pack; Spanish troops are rarely shown with back-packs as worn by most other armies.  Anyway, they were consigned to the bleach-bath to remove their paint-jobs and came out after just one night looking pretty clean after a quick scrub with an old toothbrush.

Not wanting to overcommit, I put just one of the round-hatted figures through the bleach-bath.  While he emerged from his bath with his paint job looking untouched, it peeled off with little effort and the stripped figure can be seen below posed next to the grenadier selected for a trial head-swap.

The next photo shows the grenadier after the head-swap and with his 'wings' filed off his shoulders and some 5secondFIX on his legs to make them resemble trousers rather than breeches and gaiters.  The head is secured by a length of steel rod inserted into holes drilled into the head and torso.  BTW don't feel sorry for the headless figure as he is being kept for another unit I have planned.

And, with a quick white undercoat to give a better idea of what I have to work with when it comes to the paint job.

Next time I should have the sample figure painted and progressed on modifying the rest of the figures for the unit.  Not sure if this is too much detail or whether more like this is of interest - if you have a preference do let me know in the comments.

These Figures Mean Trouble

My 25mm Hinchliffe collection usually fights using my rule set, a mash-up of bits from Victory Without Quarter (VWQ) and Command and Colours (C&C).

One of the VWQ elements I've shamelessly copied is the addition of random events which can affect how units and commanders behave.  Because it can be hard remembering which units have been affected and how, I decided to make up some markers.

Firstly, my preacher who fires up a unit's morale.  He's clearly a puritan but has to serve both sides as I haven't made a high church Anglican for my royalists yet.

He was a fairly simple modification from Hinchliffe's rather dodgy[1] royalist pikeman   as can be seen here with the unpainted preacher alongside an unmodified casting.

Another event sees a unit's powder supplies affected through incompetence, in this case standing the powder barrel in a puddle with obvious consequences for the unit's firepower.

When all these random effects get too much, there's always another which sees a unit weakened as some decide they have a pressing appointment elsewhere.

Notes.

[1.]  By 'dodgy' I'm referring to his appearance; a common pikeman sporting long hair; a Van Dyke beard; wearing a sash (scarf); and, a broad-brimmed hat decorated with ostrich feathers is a rather outdated (Victorian?) idea of how the armies looked.